Hi, ok so got the roof to work now, it was the boot switch. So now the airbag light is on, done the trick under both seats but still on, got a diagnostic guy on it and his computer is saying it has an airbag ECU intermittent fault, great!! I have thought it might be an earth fault, checked all the e...

I am still working on my 206cc, like I said the roof failed last year, the other day I moved the car to turn it round on the drive, tried the roof and it worked but very slow, could it be something to do with the car standing for a long period of time? Also if your car is fitted with Peugeots lockin...

hi everyone, the clutch is now done, had to have the gear box repaired cost me 45 quid so not to bad, its all back together now and back on its wheels and the car is running, gears shifting correctly etc. Still got a couple of niggles; the fan don't seem to work, top and bottom hoses are getting hot...

Thanks for all the advice, I now need a step by step guide on how to replace the cambelt and water pump, if anyone could help I would appreciate it greatly.
Its the 2.0ltr petrol engine.

Cheers

Hi Col, if I hit the end of the shaft won't it end up pushing the other end further in to the gearbox?
cheers

Hi Col.
Yes I have undone the hub nut and the lower wishbone bottom ball joint, do I need to completely remove the two bolts from the support bearing?
I cannot see where I can hit the hub cleanly to remove the shaft.
Cheers

hi Col, yeah the 3 bolts are on the back of the gear box where the shaft enters, I have only turned them a quarter because I was not sure what they did, the Haynes manual is not that good to be honest.
cheers

Hi Col, Sorry about the delay, the problem is that I tried to take the gearbox off without removing the O/S drive shaft first and now the box is stuck, it is now hanging over toward the front of the car. I have undone the 2 bolts on the intermediate bearing and still cannot remove the shaft, I think...

Hi all, Well what a night mare, so I was advised to remove the off side drive shaft to help remove the gearbox, couldn't get to one of the bolts on the intermediate bearing, finally today after weeks of bad weather managed to get to the other bolt/nut, I am not sure what is suppose to happen next be...

Hi Col

yes I removed the gearbox mount and bought a new one, it looked a bit rough!
I shall remove the o/s shaft and check what you said about the clutch pedal.

many thanks
kevin

Hi thanks for your advice, I had the car trailered to the garage, 3 hours later the mechanic called me to tell me the engine was seized, Had it trailered back home at a cost of £100 round trip. I had a gut feeling the engine was not seized so I invested in a load of tools etc, took the throttle body...

Many thanks for your advice Col. I have decided to let my mechanic sort it, he can do the clutch at the same time, Just need to organise it to be recovered to his garage. I did look at the idea of removing the n/s wheel, inner wheel cover and all the stuff connected to the air box but I don't have t...

Thanks for your reply, I still cannot turn the engine, I think its the starter motor that's faulty but, I cannot get to it, either from above or from under the car, has anyone ever removed the starter motor on a 2.0ltr because I am losted, I can hardly see the fixing bolts or even the solenoid. Many...

Hi all, I just bought a 2003 2.0ltr petrol 206cc, its been left in a garage for 2 yrs after the clutch release bearing went, the battery was totally dead, I did try to start it with my jump starter but it just made a clicking noise and then a electronic buzz. I bought a brand new battery and followe...