TU5JP4 Cam Sprockets Tightening Torque

Anything related to the 206CC
Post Reply
gpktm
Posts: 45
Joined: Fri Nov 21, 2014 1:03 am
Location: Melbourne, AU

TU5JP4 Cam Sprockets Tightening Torque

Post by gpktm »

Hi all

After replacing the cam ladder sealant, I have to put back the camshaft sprockets but I am a bit confused with the tightening torque. I have the Haynes manual saying that is 45Nm for the 1.6L engine which is the one I have (TU5JP4 1.6L 16V NFU). But in this video though, they torque is set to 8kpm (about 80Nm) https://youtu.be/RCB8xY-v6-I?t=1203 and in the repair guide of the forum I could not find any info regarding the NFU engine. Can anyone assst?
haynes.PNG
You do not have the required permissions to view the files attached to this post.

IanL
Posts: 1380
Joined: Wed May 13, 2015 10:34 pm
Location: Jersey, Channel Islands

Re: TU5JP4 Cam Sprockets Tightening Torque

Post by IanL »

From the Service Box:

Reference Designation daNm
(1) Fixing of the camshaft gear 4,5
(2) Roller tensioner fastening 2,2
(3) Ancillaries pulley mounting 2

So 45 Nm is correct

gpktm
Posts: 45
Joined: Fri Nov 21, 2014 1:03 am
Location: Melbourne, AU

Re: TU5JP4 Cam Sprockets Tightening Torque

Post by gpktm »

Thanks Ian

gpktm
Posts: 45
Joined: Fri Nov 21, 2014 1:03 am
Location: Melbourne, AU

Re: TU5JP4 Cam Sprockets Tightening Torque

Post by gpktm »

IanL wrote: Sun Jan 10, 2021 12:45 pm From the Service Box:

Reference Designation daNm
(1) Fixing of the camshaft gear 4,5
(2) Roller tensioner fastening 2,2
(3) Ancillaries pulley mounting 2

So 45 Nm is correct
Do you have maybe the torque for the two engine brackets, the one that bolts on to the engine block and the one that bolts on the car body? The Haynes manual has three different ones and I am not very sure which is what.

1. Upper Bracket-to-engine bracket bolts: 60Nm
2. Upper Bracket-to-engine mounting nut: 45Nm
3. Engine Bracket-to-cylinder head bolts: 45Nm

I am guessing is like I have marked it in the photos but I rather double-check.
You do not have the required permissions to view the files attached to this post.

IanL
Posts: 1380
Joined: Wed May 13, 2015 10:34 pm
Location: Jersey, Channel Islands

Re: TU5JP4 Cam Sprockets Tightening Torque

Post by IanL »

Image

Hope this helps

Post Reply