How to get a power wire from the engine bay to the cab

Audio Equipment, installs & Recommendations.....
User avatar
MartinMax
Posts: 84
Joined: Wed Jan 31, 2018 8:16 am

Re: How to get a power wire from the engine bay to the cab

Post by MartinMax »

I spent hours trying to find the grommet and plastic part behind the glove-box. Then I realized since my car has the steering wheel on the left, this is actually positioned under the steering wheel. From then on it was pretty straight forward:
- Locate the grommet on the inside (this must be done blindly, as the location is very tight)
- Looking at the plastic part with the bunch of wires in the middle, you can drill a hole from the engine bay
(this requires a relatively long drill bit ~60cm)
- Once the hole is there you should make a small hole for the wire on the grommet and pull it through the hole.
(the grommet will seal the hole from the inside)
---------------------------
2001 206cc 2.0 S16
Silver with matte black accents...