206cc rear abs sensor

[jeromecqy]

i have a 206 with all 206cc parts fitted on

any techie or any one who has a 2003 1.6 16v 206cc know what rear abs sensor type is theirs? my car VIN NO. is VF32DNFUR43260360 if anyone can trace what rear abs sensor is use for this VIN number i would be grateful. i suppose there are two type that is
and


i hope someone with their 206cc has experience changing their rear abs sensor and know which type theirs is . thanks in advance . mine is a 2003 1.6 16v 206cc

[jeromecqy]

are those two sensor of different system . one is an active abs sensor and another is a passive abs sensor . can anyone confirm that for me?

[Capncol]

If you have the 206cc running gear (including rear discs, hubs and ABS system inc ECU) Then you will need the later magnetic type.

[gazza82]

Looks like you need part no 4545 A3

[jeromecqy]

are those parts specifically for my vin no. or just for a generic 1.6 ltr engine 206cc?

Thanks for the help though.

[Capncol]

It needs to match the system on your car. You can't mix & matchIf you have the 2003 running gear then you have magnetic rings instead of reluctor rings and if so, you need the later abs sensor. The electrical plugs are different from the earlier ones too.

[jeromecqy]

my problem isn't what abs sensor to use because it wouldn't fit anyway. its that I might have gotten the wrong axle to match with my system so I want to know what the original abs sensor is to determine what the original axle is . because I suspect the dealer gave me the wrong axle to fit on my car causing an abs fault

[Capncol]

Axles are the same. It's the hubs that make the difference, and they unbolt.

[jeromecqy]

but if you get yours at a chop shop it normally comes in set with the axle . so I gotta change the whole axle together. so I gotta determine if I got the right axle so I don't waste anytime to change the axle again

So can i get confirmation from @gazza82 that the diagram was specifically for my car's vin no.?

[leegsi]

Can you not look at your old axle

[Capncol]

It's 3 or 4 bolts each side to unbolt the hubs

[gazza82]

are those parts specifically for my vin no. or just for a generic 1.6 ltr engine 206cc?

Thanks for the help though.

I used your vin no.

One here ... https://www.amazon.co.uk/gp/aw/d/B00ZP93E0E?pc_redir=T1

[jeromecqy]

are those parts specifically for my vin no. or just for a generic 1.6 ltr engine 206cc?

Thanks for the help though.

I used your vin no.

One here ... https://www.amazon.co.uk/gp/aw/d/B00ZP93E0E?pc_redir=T1

thanks man . im gonna sure change the axle then. because i change my rear axle from drum brakes to disc brake and i suppose the guy gave me the wrong axle causing all those abs fault . i am currently using the axle with the part no. 4545 79 here: http://www.ebay.com.au/itm/SENSOR-ABS-4 ... 1550760447

if you wanna know more about my problem they are here: http://www.peugeot206cc.co.uk/viewtopic.php?f=4&t=16435

there is also video of the problem so you can refer to that