Hydraulic block wires

[Arciem]

Hi guys.

When doing some repairs with a grinder, the wires connecting the temperature valves to the12 yellow connector in the modular connector were accidentally cut. The hectic part is that there are 12 wires and they are all grey. I have noticed in the yellow connector side the wires are somehow colour coded but on the sensor side they are not. Can someone please help me on how to connect the wires. Please, please, please

[IanL]

Which hydraulic block? Is it the AL4 transmission, the ABS, the roof....?

Also, please post the last eight digits of the VIN, to ensure the correct details for your car from the SEDRE.

[Arciem]

The AL4 transmission, what are the VIN numbers??? Where can i get them, are they the same as the chassis numbers?

[IanL]

Yes, they are.

[Arciem]

Here they are. Chassis number VF32DNFUR41937487. Engine number 1VFE34698571. Hope they help.

[IanL]

Item 1635 is the Hydraulic Block
Item 1630 is the gearbox ECU
Item 1005 is the starter inhibitor relay
Item BSI1 is the BSI (Passenger Compartment Fusebox)

Good luck !

[Arciem]

Thanks alot man.... Let me hit it, will get back to you...... Thanks a million...

[IanL]

Slight hiccup. The drawing above is for a multiplexed car.

Yours is not multiplexed, so this is the correct drawing - unfortunately not in such a helpful format:

[Arciem]

Waaaah! Where are the V1,V2,V3..... etc wires that go to the B1 to B12 connectors, those are the cut wires?

[IanL]

I don't recognise the reference to V1, V2, V3...

Does this help?



B1-B12 on the hydraulic pack all connect to the AT ECU.

[Arciem]

Yep, this is what i want but on the picture you've cut the lower part which is the important part that i need.... Sorry for the bother man.

[Arciem]

Screenshot_2016-06-14-17-10-51.png

[IanL]

I think I understand now. That part is within the Hydraulic Pack, so it is treated as a replaceable item, and no repair information is available in the Service Box.

I think you need a replacement Item 1, Peugeot Part No 2529 26 :



Alternatively, this may help you do some detective work:

[Arciem]

Yep you got right what am asking, the wires that go through the retaining seal are the ones that were cut. The last diagram that yyou sent me has the answer, i believe i can go through it but you have cropped the part am looking for, THE LOWER PART

[IanL]

How's this?