Hi all can anyone tell me what six torx bit I will need to take head bolts out. I suspect my engine has a blown head gasket so I an going to investigate. I have not started the job yet and was told I will need a rather large torx bit.
Any help greatly appreciated otherwise will have to wait for the arrival of the new head bolts.
What size torx bit for head bolts 206cc 1.6
-
Fihen
- Posts: 60
- Joined: Tue Jul 17, 2018 5:40 am
- Location: Denmark,Western Australia
-
IanL
- Posts: 1562
- Joined: Wed May 13, 2015 10:34 pm
- Location: Jersey, Channel Islands
Re: What size torx bit for head bolts 206cc 1.6
The Peugeot Service Box describes the cylinder head bolts as 10x150-117. The bolt socket is listed as 0185, but that may be the PSA Part No. rather than the size.
I hope that helps.
I hope that helps.
-
gazza82
- Posts: 2129
- Joined: Sat Apr 23, 2011 8:41 pm
- Location: Buckinghamshire, UK
Re: What size torx bit for head bolts 206cc 1.6
Just had a look on 206info and it suggests E-14 on one thread ..
There are a few Torx headed bolts on a 206 so buying a set might be a better bet ..
There are a few Torx headed bolts on a 206 so buying a set might be a better bet ..
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Subaru BRZ Auto, Alfa Romeo MiTo