roof and windows

Post by **Capncol** » Thu Mar 26, 2015 12:18 pm

They are linked. That is what BSI is for. It allows different systems to communicate.

Slo · Post by **Slo** » Fri Mar 27, 2015 2:05 pm

kwackered wrote:thanks for the input again guys , appreciated , i was under the impression that the roof ECU also controlled the windows, i guess that was wrong ?

Sorry for the crudeness never was any good at etch a sketch or free hand

From the haynes manual

tenpole · Post by **tenpole** » Fri Mar 27, 2015 7:05 pm

I did not know there was a haynes manual for our car.

Slo · Post by **Slo** » Fri Mar 27, 2015 7:16 pm

Its the black one 2002-2009. Manual number is 4613. Covers the cc but only the 2.0 16v engine not the 1.6.

tenpole · Post by **tenpole** » Fri Mar 27, 2015 7:18 pm

I expect the 1.6 engine would be covered in a separate standard 206 manual.

kwackered · Post by **kwackered** » Sat Mar 28, 2015 12:01 am

thanks again

, i have bought the haynes manual, and now i bought the pp2000 leads and software too, hopefully that will give me an insight to the problem

Slo · Post by **Slo** » Sat Mar 28, 2015 12:45 am

Does your car beep when you try the roof?

kwackered · Post by **kwackered** » Sun Mar 29, 2015 5:40 pm

no beep , no sounds at all not even a relay type click

, i dont hear a click when i operate window switches either

Slo · Post by **Slo** » Sun Mar 29, 2015 10:46 pm

Check if your roof switch is plugged in

Any luck with pp2000? Whats it say about the roof?

kwackered · Post by **kwackered** » Mon Mar 30, 2015 7:32 am

yes roof switch is plugged in ,the pp2000 hasnt arrived yet ,thanks

Slo · Post by **Slo** » Mon Mar 30, 2015 9:58 am

Cant think why it doesnt beep when you try the switch then. I have a shorted speed sensor circuit so the car thinks its moving even when parked with the handbrake on so keeps disabling the roof for safety, which is really annoying, ive even tried it with the speedo unplugged and still same thing pp2000 saying speed sensor but when i try the switch it does beep.

kwackered · Post by **kwackered** » Mon Mar 30, 2015 9:03 pm

once i check it out with pp2000 ill report back,

leegsi · Post by **leegsi** » Mon Mar 30, 2015 9:05 pm

I have a working roof switch with no cover on it I could send to you to try

kwackered · Post by **kwackered** » Mon Mar 30, 2015 9:24 pm

thats would be great leegsi, ill pm you ,many thanks

kwackered · Post by **kwackered** » Wed Apr 01, 2015 1:37 pm

typically my day off work but the pp2000 still hasnt arrived , i went up to the breakers got a window/mirror switch just in case, but still no windows or mirror electrics, if i end up going down the bsi/ecu/transponder etc route i need a set off the same doner car , i assume both the ecu and bsi need to match part numbers off mine?
EDIT : just called a breakers who has a few 206cc's and he says as long as the bsi /ecu are same make rather than matching numbers, but he also says its not likely to be the fault, maybe ill wait till my software etc comes then try again

roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows

Re: roof and windows