Thank you will post some piccys when done cheersCapncol wrote:They clip in at the ends and there are 3 bolts on the top edge of the rear (you can see them with the boot open) there is 3 or 4 in a similar position on the front.
I just bought another 206cc
-
handyandy1966
- Posts: 46
- Joined: Tue Mar 25, 2014 10:41 pm
- Location: westcliff on sea nr sunny southend essex
Re: I just bought another 206cc
-
handyandy1966
- Posts: 46
- Joined: Tue Mar 25, 2014 10:41 pm
- Location: westcliff on sea nr sunny southend essex
Re: I just bought another 206cc
do i have to take the bumpers off comepletly to put the inserts on ?cheers
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: I just bought another 206cc
No
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
handyandy1966
- Posts: 46
- Joined: Tue Mar 25, 2014 10:41 pm
- Location: westcliff on sea nr sunny southend essex
Re: I just bought another 206cc
]done easy job well happy looks great i think any way !
-
tcapps
- Posts: 4
- Joined: Sun Dec 15, 2013 5:50 pm
Re: I just bought another 206cc
Hi Capncol
I am going to attempt to repair the wifes 206 Ma5 gearbox front input shaft bearing and I have been looking at the photos you have put online.
your instructions for stripping the box down stop when you get to the reverse gear..and the pictures continue to the full strip down.
Can you please give me a little more info on what I need to do to get to the front input shaft bearing please.
Thanks
Terry
I am going to attempt to repair the wifes 206 Ma5 gearbox front input shaft bearing and I have been looking at the photos you have put online.
your instructions for stripping the box down stop when you get to the reverse gear..and the pictures continue to the full strip down.
Can you please give me a little more info on what I need to do to get to the front input shaft bearing please.
Thanks
Terry
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: I just bought another 206cc
The problem was with the reverse and I only stripped it down completely just to check everything else was OK.
It was done more for interest rather than a *how to*
Anyway, if you unbolt the selector mechanism, and knock out the remaining roll pins, you can take it out as one assembly. Check the diff bearings while you are there.
Good luck. Start a new thread if you get stuck and I will try and help.
It was done more for interest rather than a *how to*
Anyway, if you unbolt the selector mechanism, and knock out the remaining roll pins, you can take it out as one assembly. Check the diff bearings while you are there.
Good luck. Start a new thread if you get stuck and I will try and help.
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.