radio code

[roy630]

can any one tell me how to install radio code in to radio ,I have the code but the center display is not readable, and I did not get any car manuals with the car how do I get to the code input stage and which buttons on the radio to use radio/tape /cd player with cd changer in boot 1999/2000 206, thanks roy630

[EdmundIJones]

When it says CODE on the radio (not the clock display area), just use the present station keys (1-6) to enter the radio code. After the 4th digit is entered it will just start working normally.

[Capncol]

I did not get any car manuals with the car

Handbook available on this very site!

http://www.peugeot206cc.co.uk/downloads/handbook.pdf

[roy630]

When it says CODE on the radio (not the clock display area), just use the present station keys (1-6) to enter the radio code. After the 4th digit is entered it will just start working normally.

thanks for that don,t know how to get to the stage where code is displayed my radio does not have display area on radio it is in center of dash just above hazard warning light switch and the display is not readable , have done it once before but did not know what I had done to get to the code to be displayed and I can not read it so need to know how to get it up so that I can install code blind so to speak have down loaded car manual thanks but is not in there ?

[GrandadMonkey]

Just replace the bulbs in your centre display if they have blown. It is simple to do and if you search on the forum folk have explained how to do it. There are two types of bulbs though, make sure you get the right ones for your car. A good idea to take one out so that your dealer can match it up.

e.g.
http://www.peugeot206cc.co.uk/viewtopic ... 9&p=112030