roof and windows

[kwackered]

yea thanks gazza, i checked connections everywhere , thinking of taking seats n carpets out next to trace and test wires,
i emailed a place to have my roof ecu tested just so i know for sure if its faulty

[kwackered]

a quick update,i just bought a used bsi kit , the under bonnet fusebox and another roof ecu, all from a ebay breaker with great feedback and assures me the car was running and roof etc was working before the car was broken.
will it do any harm to just swap out the roof ecu first or should i just go ahead and change everything in one go?
thanks

[Slo]

It wont hurt to try the roof ecu first however if it detects a fault it could disable the roof with a code which would have to be cleared with pp2000.

Im not sure if you will also need the engine ecu steering lock antenna and locks with keys from the breakers car too or if you will be able to just program them together with your current ecu as im sure they are all programmed together as a matching set to make it hard to steal the cars

[kwackered]

thanks slo, maybe ill just change the lot , the lot i bought has locks /keys petrol cap the pick up ring thing , ignition barrel ecu ,bsi and fusebox , and the roof ecu of course

[Slo]

Just hope that after you change everything it isnt exactly the same as it is now then because of faulty wiring.

Keep us posted mate.

[kwackered]

yea, i know but this seems the way to go, i cant see an obvious fault anywhere that i can access, hopefully it will be here by wednesday and if the weathers ok ill get it fitted then, i will post back with the results

[kwackered]

just to clarify i go through the battery disconnect procedure ,change all the bits the reconnect battery?
thanks

[Slo]

Well you are replacing the bsi so you could just strip everything off without waiting however if the replacement is a dud you could have to put it back so best to be on the safe side. Did you try the roof ecu?

[Capncol]

I would just change the roof ecu.

[kwackered]

thanks maybe ill try the roof ecu first, havent tried anything yet though bits are on the way hopefully tomorrow,

[kwackered]

hello again, my bits arrived and i fitted the roof ecu and it was still the same so i fitted the bsi ,ecu along with the key chip and pickup, and now the windows all work so do the mirrors, and the roof still does not ,however now when i try the roof i get the beeps wich is a plus as i got nothing before,

[Slo]

Ahh at least you will be able to reset it now and diagnose the fault

[kwackered]

yea, that string bit hanging down, dont know if thats meant to be there hanging, im thinking microswitches now, maybe ill go back out and plug the laptop in again first.
UPDATE: plugged in pp2000 ,it read roof ecu at last but it had faults, cleared those and now everything works , happy days , many thanks for all your help guys

[tenpole]

Good going kwackererd

[Capncol]

Well done