Reverse light wiring?

[hussnainh8]

Hi there,

I have a Peugeot 206 (2002) 1.1 LX and I am trying to install a reverse camera to the car however it takes its power from the reverse light so I can only use it when I am in reverse but I do not know which wire is the reverse light wire and how I would connect the camera wire to the reverse wire.. such as do I solder the camera wire to the reverse light wire or use a connector? Any ideas?

My other question is.. If I drill a hole on the outside of the boot.. Can I see the hole from the inside? Do I need to remove the boot trim to get to the hole? This is so I can route the wires into the boot.

If some body came up with an answer, it would be well appreciated.

Thank you.

[GrandadMonkey]

You need the hatchback forum, not the forum for 206cc Coupe Convertible owners.

http://www.206info.co.uk/

None of our cars have your cars engine, gearbox or bodywork.

Good luck.

[hussnainh8]

Thank you and I apologise. I do not know how to remove the thread.

[GrandadMonkey]

No need to apologise mate. I'll leave the thread on as it may help others who search on here.

You are welcome to remain on the forum as a member if you wish.

Your car will have some similarities with the 206cc and you may find some posts on here interesting.

Good luck with resolving the issue with the camera installation.