Lexus style lights,hard to mount?

cOrpious · Post by **cOrpious** » Fri Aug 16, 2002 12:49 pm

Hiya,i'm planning to buy the Lexus style lights.
What i'm wondering is if they are hard to mount on the car since I dont have to much experience of that kinda stuff

cheers in advance and keep rolling!
/C

thb · Post by **thb** » Fri Aug 16, 2002 1:10 pm

AFAIK they're not that tricky to fit, but you may need to cut off a bit off plastic on the light to make them fit better

Erm posted this in discussion:
remove one of your red lights and have some card ready......

trace the edge of the water guard onto the card.....cut it out and then thats your template for the light.....

draw it on.....cut it off.....use a bit more force

and bada boom bada bing......

Post by **Lyndon** » Fri Aug 16, 2002 2:51 pm

or look on the main site in the pictures section of some that ralf korner did

like many people have said, dead easy to fit even i did it

Erm · Post by **Erm** » Fri Aug 16, 2002 2:58 pm

dead easy to fit!!!

If they are already prepared for the CC (ie water guard cut already then it really is a 5 minute job just unscrew one nut per light, unplug old ones.....push lexus ones into place plug it in and tighten the nut and your done...

otherwise you need about 15-20 minutes as long as you have the right cutting tool available. Still its very simple even a girly could do it

CB · Post by CB » Tue Aug 20, 2002 2:36 pm

How sexist Erm!!! But probably fair...

Erm · Post by **Erm** » Tue Aug 20, 2002 4:06 pm

Erm

Derek · Post by **Derek** » Fri Aug 23, 2002 10:23 pm

it's very easy - even i did it too