QUICKSHIFT GEAR LINKAGE HELP NEEDED!!

willie · Post by **willie** » Sun Sep 08, 2002 5:47 am

I have got the griffth enginering quickshift linkage has anyone installed one themselves i need to get a blow by blow account on how it was done as my brother is going to have a go at installing it when i get my cc any help on this would be brill .

mvoong · Post by **mvoong** » Mon Sep 09, 2002 1:19 pm

I've already put a detailed account of how to install it here so just look up postings by myself.

Michael

Matt · Post by **Matt** » Mon Sep 09, 2002 3:00 pm

Aren't you still actually waiting on your CC though Willie??

stephen T · Post by **stephen T** » Mon Sep 09, 2002 5:00 pm

he has got all the bits just not the cc.

willie · Post by **willie** » Mon Sep 09, 2002 7:26 pm

yes its lookin like friday 20 sept

willie · Post by **willie** » Mon Sep 09, 2002 7:30 pm

Thanx mvoong which setting did you leave it on the thing comes with the middle setting on(as in the three holes with the silver ball in it ) ? and do you need to remove the gear gater on the inside of the car for to get at it when installing it?

<font size=-1>[ This Message was edited by: willie on 2002-09-09 20:20 ]</font>

<font size=-1>[ This Message was edited by: willie on 2002-09-09 20:21 ]</font>

Matt · Post by **Matt** » Tue Sep 10, 2002 1:09 pm

He'll be able to build one from scratch before it arrives!!

mvoong · Post by **mvoong** » Tue Sep 10, 2002 4:34 pm

If I remember I moved it to the longest setting which means the shortest travel and no you don't need to do anything inside the car. Hope that helps. Once you've sussed out how to put it on and off it's easy so you can play around with the settings. Just remeber to wait an hour or so for the exhaust to cool down or you'll be getting some serious burns.

Michael