Info required on parts availability. Please help

tabs · Post by **tabs** » Wed Aug 11, 2004 4:07 pm

Afternoon all.

I'm looking to increase the output on a 206cc SE. However, it seems most tuning parts available are for the 1600cc, not the 2.0l. I am going to start with an Cold-Air Induction Kit, probably K&N G2 or a Viper, a Power Boost Valve and a Superchip. Hopefully this should return around 20BHP+ extra which is okay, but not brilliant for Â£600, however I am looking for more. The car is still less than 2 years old and has only done 17k miles so I don't want to start pulling the engine apart just yet, so my next solution is the exhaust. This is where I am struggling. Nobody seems to make a complete replacement system or a 4 branch manifold for this vehicle.
Any suggestions anyone?

reap · Post by **reap** » Wed Aug 11, 2004 8:56 pm

hia mate.
ive just emailed the rally guys for peugeot for you.they normal give us a list of ex wrx parts they have left over for there cars.

asked if they had enthing that will fit 2.0 litre from their wrxs project 206 last year.
they will contact me shortly.
will let you know what they can offer you.hope this of some help to you?.
reap

teddy206 GTi · Post by **teddy206 GTi** » Wed Aug 11, 2004 11:23 pm

is htere anythinga tall in common with the rally 206??

The engine isn't the EW10, and everything other than the basic shell is different.

KEV206 · Post by **KEV206** » Thu Aug 12, 2004 2:14 pm

what kinda parts do they normally have left over then???

tabs · Post by **tabs** » Thu Aug 12, 2004 2:47 pm

hia mate.
ive just emailed the rally guys for peugeot for you.they normal give us a list of ex wrx parts they have left over for there cars. asked if they had enthing that will fit 2.0 litre from their wrxs project 206 last year.
they will contact me shortly.
will let you know what they can offer you.hope this of some help to you?.
reap

Thanks for that.
Anyone know if the GTi180 exhaust manifold is much better than the one fitted to the standard 206GTi. I an assuming that the manifold would also fit the 206CC.

KEV206 · Post by **KEV206** » Thu Aug 12, 2004 8:19 pm

hi ya mate i think you will find the gti 180 wont fit your car, has been tryed on 206 gti and dont fit!! i carnt see the 206cc being any different if you ask me!!

Its a damn shame tho!!!

reap · Post by **reap** » Thu Aug 12, 2004 10:46 pm

tis true they dont run the same engines but they do alot of stuff for privateers etc.
if they havent got anything kicking around im more than sure they could give some pointers as to where you can relese more bhp....

we shall have to see what they come back with.