Back seat removal to access the rear speakers

C3DPO · Post by **C3DPO** » Thu Oct 14, 2004 2:12 pm

Hi guys,

Sorry for creating yet another post. I tried searching but kept getting 50 + pages of wrong results.

Im trying to get at the rear speaker wire so i can hook up my 6x9 windstop.

I have managed to get the two bolts of the bottom bench.

But I cant figure out how to take off the remaining two bolts, where the horizontal and verticle seat parts meet. Ive tried going under the seat and through the gap in the leather.

Any help, links pics would be great as I really am stuck

thanks

Dean

C3DPO · Post by **C3DPO** » Thu Oct 14, 2004 7:31 pm

Can nobody help me with this?????

Post by **Lyndon** » Thu Oct 14, 2004 7:53 pm

i think i just wiggled/twisted/swore at the bench part and somehow it came free

sorry i can't be more help

axl77 · Post by **axl77** » Thu Oct 14, 2004 9:13 pm

http://members.lycos.nl/peugeotdata/dat ... eugels.htm

so first remove the seat by removing the bolts at the front
then you can pull the seat to you.

then you can acces the bolts that hold the backresst and then you can pull it up

C3DPO · Post by **C3DPO** » Fri Oct 15, 2004 12:05 am

thankyou, i didnt realise that you could pull out the horizontal seat part to get it, thanks for the pics its made it much easier. will install at weekend

thanks again

rob · Post by **rob** » Thu Oct 21, 2004 9:25 pm

you do need to remove the 2 nuts at the front under edge of the seat base. Then you need to slide your arms under it. Then with your knees push it towards the boot and then lift your arms and it will unhook itself. This will then reveal the nuts on the bottom of the seat backs.

Very easy when you know how. But that took me a few dozen times and lots of swearing to get it right.