Stereo not saving settings...

jugga83 · Post by **jugga83** » Thu Jun 22, 2006 1:39 am

Ok guys i am new here and i dont know a thing about pugs but i joined as i need to sort a friends stereo out.

basically i took the old standard cd player out (it has a extra plug on it thats for the remote control near the steering wheel) anyway fitted a jvc mp3 player in there car and all is well apart from one thing...

It doesnt hold its memory, liek if i save the bass/treble...ect settings soon as car is switched off and on again the memory isnt saved.

Any ideas on how i go about sorting this out?

thanks....

Post by **Lyndon** » Thu Jun 22, 2006 6:05 pm

this as been covered b4, it just involves swapping a couple of wires around to get a power feed all the time to save the settings.

please do a forum search if no luck then please post again and we'll see what we can do

jugga83 · Post by **jugga83** » Thu Aug 03, 2006 3:16 pm

Ive searched, no luck. can someone please tell me how you do this?

bass/treble..ect..ect still do not save once key is taken out of ignition. i fitted this for my boss and they keep going on at me every single day about it....

hellppp

Dabz · Post by **Dabz** » Thu Aug 03, 2006 3:20 pm

in peugeots the constant and ignition wires are the other way round to other cars, so it's sending the wrong signal to the wrong bit of the ISO block. If it's a modern stereo the constant (or battery) and ingition cables should have bullet connectors in-line which you can just swap over with eachother, if not then cut the battery and ignition wires after the ISO block, and join to the opposite (eg constant - join to ignition)

jugga83 · Post by **jugga83** » Thu Aug 03, 2006 3:26 pm

ok let me just clarify... i forgot what colours they are at the moment, but basically i swap the red with the yellow? i think 1 is baby blue and other is black on the pug. and jobs done?

p.s thanks for very quick reply