Some advice needed on a 206cc interior light removal
-
1981gti
- Posts: 3
- Joined: Fri Oct 01, 2010 11:13 pm
Some advice needed on a 206cc interior light removal
My 206cc has a slight leak through the ariel base i'm going to fix it with some silcone sealent but am having some troubles with removing my interior light. is it around the edge of the interior light lense I need to unclip or around the main big cream trim that the interior light is fixed to. Would really appreciate some advice please? Many Thanks James
- GrandadMonkey
- Posts: 3583
- Joined: Thu May 04, 2006 8:00 am
- Location: Leicestershire
Re: Some advice needed on a 206cc interior light removal
Prise out the courtesy light first, and disconnect it from the wiring connector.
Then unclip the light surround from the headlining.
Remove the insulating cap then slacken and remove the nut.
You can then detach the aerial lead and lift the aerial off the roof, complete with its rubber seal.
Let us know how you get on. You probably need a new rubber seal.
Then unclip the light surround from the headlining.
Remove the insulating cap then slacken and remove the nut.
You can then detach the aerial lead and lift the aerial off the roof, complete with its rubber seal.
Let us know how you get on. You probably need a new rubber seal.
Ron
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
"If it ain't broke don't fix it!"
Golf 1.5 Tsi Evo SE Nav Estate Atlantic Blue
Polo 1.0 SEL DSG Reef Blue (wife's)
(Previously owned a 2005 206CC 1.6 Allure Moonstone for 10 years)
-
1981gti
- Posts: 3
- Joined: Fri Oct 01, 2010 11:13 pm
Re: Some advice needed on a 206cc interior light removal
Thankyou ever so much for the advice i'll give it a go when i've got some spare time.
-
Ldare2000
- Posts: 2
- Joined: Wed Oct 27, 2010 6:59 pm
Re: Some advice needed on a 206cc interior light removal
Hi
I too have this problem, which is the insulating cap? Ive successfully removed the light section and the plastic trim and can see the metal base of the aerial?
I can't work out what to remove next?
Thanks
I too have this problem, which is the insulating cap? Ive successfully removed the light section and the plastic trim and can see the metal base of the aerial?
I can't work out what to remove next?
Thanks