Hi' I'm wondering if anyon can help me? I have a failed gearbox input shaft bearing on a 1.4 ltr 206 with what I believe is an MA gearbox. My question is relatively simple and is this, "can I remove the bell housing from the gearbox (as thats where I beleive the bearing outer is housed), or do I have to strip the gearbox down from the other end and remove the shafts and selector(s) any help would be much appreciated.
Thanks
Gearbox input shaft bearing
-
ptomo
- Posts: 3
- Joined: Tue May 21, 2013 6:28 pm
Re: Gearbox input shaft bearing
If its the input shaft I'd of thought box off all gears an shafts out and pull bearing out of the case,I've done a few pg1's on rovers an that's the only way 
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: Gearbox input shaft bearing
See here if you want to have a go gearbox rebuild
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.