I have manually closed roof.
Makes continually beeping now and doesnt work.
The clips at back can be turned 90% apparently but how?
Any owners in south London with same previous problem ?
Any help please
roof reset
-
PEUG1
- Posts: 14
- Joined: Sat Jul 20, 2013 9:25 am
Re: roof reset
Found the solution very easy!!!!
Anyone with same problem please post
Anyone with same problem please post
-
Capncol
- Posts: 3761
- Joined: Fri Nov 11, 2011 12:40 pm
- Location: Reading & Southampton
Re: roof reset
Hi Peug1. Glad you found an answer to your problem. Would you care to share it?
Cheers Col.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)
When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
-
PEUG1
- Posts: 14
- Joined: Sat Jul 20, 2013 9:25 am
Re: roof reset
With boot lid up/open,the switch in boot to the left where "roller blind" hooks/sits onto. I placed a small metal object between "blind" and silver metal thats exposed to depress the switch contact.
Pulled out both plastic clips from "notches" and rotated clockwise( not into another notch).
Job done.Metal object removed after opening and closing normally. Works perfectly.
Oh problem began when I interrupted opening sequence and attempted to close.
Hope this helps some others.
Pulled out both plastic clips from "notches" and rotated clockwise( not into another notch).
Job done.Metal object removed after opening and closing normally. Works perfectly.
Oh problem began when I interrupted opening sequence and attempted to close.
Hope this helps some others.