Abs

Anything related to the 206CC
ilo
Posts: 11
Joined: Tue Jul 15, 2014 2:19 am

Abs

Post by ilo »

I had four different code readers attached to my Peugeot 206 and it shows no faults on the ABS but the light still comes on. sometimes it stays off for a long time once it goes out but when it's on its faintly on and fully on at deferent times would it show on a reader if there was oil or grease on the cogs on the drive shafts thans
Top
User avatar
Capncol
Posts: 3761
Joined: Fri Nov 11, 2011 12:40 pm
Location: Reading & Southampton

Re: Abs

Post by Capncol »

What make were the readers? Did they connect to the ABS system, or just not show any codes?
Dirt, oil & grease shouldn't give any issues. Some ABS systems run inside axles in with the oil.
Cheers Col.


206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)

When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
Top
User avatar
gazza82
Posts: 2129
Joined: Sat Apr 23, 2011 8:41 pm
Location: Buckinghamshire, UK

Re: Abs

Post by gazza82 »

Check an abs ring isn't cracked too .. had that on the Clio .. right pain to fix.
Family Fleet: ex-Cayman Green 206 CC 2.0 LE, Indigo Blue 206 1.4 HDi Hatchback, Subaru BRZ Auto, Alfa Romeo MiTo
Top
Slo
Posts: 446
Joined: Sat Feb 07, 2015 12:02 pm

Re: Abs

Post by Slo »

Same here much easier to just change the cv joint £26 brand new including a new boot too for the 2.0 16v instead of messing around getting a new ring to sit on the end of the rusty old one
2003 03'reg Peugeot 206cc 1997cc Manual
Top
ilo
Posts: 11
Joined: Tue Jul 15, 2014 2:19 am

Re: Abs

Post by ilo »

Snap on launch maxiscan actel all read but says no codes
Top
Slo
Posts: 446
Joined: Sat Feb 07, 2015 12:02 pm

Re: Abs

Post by Slo »

Do you get the abs fault message on the multi display at the same time or ever?

If not and the light comes on faintly it could be just a false alarm and a faulty instrument panel.

Its not a bulb inside its an led and theyre not supposed to light up feint just on or off so something must be dying on your dash somewhere.
2003 03'reg Peugeot 206cc 1997cc Manual
Top
User avatar
Capncol
Posts: 3761
Joined: Fri Nov 11, 2011 12:40 pm
Location: Reading & Southampton

Re: Abs

Post by Capncol »

Certainly should have got codes with those machines.
I think Slo may be on the right track. Is there any pattern, ie, it only happens when it rains?
Cheers Col.


206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)

When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
Top
ilo
Posts: 11
Joined: Tue Jul 15, 2014 2:19 am

Re: Abs

Post by ilo »

Sorry not replied sooner but still comes on and goes off on a little run 5 miles .but when you restart the car comes back on again
Top
ilo
Posts: 11
Joined: Tue Jul 15, 2014 2:19 am

Re: Abs

Post by ilo »

All cogs are cleaned
Top
User avatar
Capncol
Posts: 3761
Joined: Fri Nov 11, 2011 12:40 pm
Location: Reading & Southampton

Re: Abs

Post by Capncol »

Brken ring usually give a cohearance fault.
Have you tried live data >wheel speed?
Cheers Col.


206cc 1.6ltr (Wifes toy)
Mercedes ML (workhorse)
Corvette C3 (my toy)

When requesting help of a technical nature, please give as much detail of the fault as possible along with details of exact model, engine size & type, gearbox, year, mileage, and any relevant work carried out to try to solve the problem to help us help you.
Better still, put the details in your signature.
Top

Return to “206CC General”