I am fitting a replacement engine loom. But I can't fit one connector to any where.
Fuse box Delphi BSM B3
Three pin plug. Sits around starter motor.
Grey & white to Pin 2 on Black multiway plug PM1 on fuse box, Earth and Grey & Red to pin 14 on same Black Multiway.
a, What does it do?
b, Where does it go?
*URGENT*
SOLVED - Fuse box Black Multiway Pin Identification needed.
-
Shaun Lee
- Posts: 26
- Joined: Tue Apr 02, 2013 6:31 pm
- Location: Cambridgeshire
SOLVED - Fuse box Black Multiway Pin Identification needed.
02 Pug 206cc 1.6 NFU Moonstone.
Problems to date:
* Roof not working, Gearbox bearing knackered, Wishbones, droplinks and brake discs kaput - All Fixed.
* Rear wheel bearing rumble - TBC
* Engine wiring fried and Immobilser / Eco mode fault......ongoing.
Problems to date:
* Roof not working, Gearbox bearing knackered, Wishbones, droplinks and brake discs kaput - All Fixed.
* Rear wheel bearing rumble - TBC
* Engine wiring fried and Immobilser / Eco mode fault......ongoing.
-
Enright
- Posts: 452
- Joined: Tue Apr 17, 2012 2:24 pm
- Location: Arnold, Nottingham
Re: SOLVED - Fuse box Black Multiway Pin Identification need
Could be the knock sensor on the back of the engine block - that is near to where the end of the starter motor is. If it is that, it's to detect pinking and send a signal to your ECU, which then adjusts your ignition to stop it from running lean. Note that's all dependant on the "if" though! 
BCingU,
Neil.
Mine: Daily driver; Mk2 MG ZS+ (TD). Current projects; 2 x Lotus Elan SE Turbos
Previous project: 56 plate 206 CC 1.6 Sport (with added Allure!)
Neil.
Mine: Daily driver; Mk2 MG ZS+ (TD). Current projects; 2 x Lotus Elan SE Turbos
Previous project: 56 plate 206 CC 1.6 Sport (with added Allure!)
-
Shaun Lee
- Posts: 26
- Joined: Tue Apr 02, 2013 6:31 pm
- Location: Cambridgeshire
Re: SOLVED - Fuse box Black Multiway Pin Identification need
Cheers Neil, Your a star. Eventually found it just didn't know what it was for. Got your PM. Just got to get it started now!! 
02 Pug 206cc 1.6 NFU Moonstone.
Problems to date:
* Roof not working, Gearbox bearing knackered, Wishbones, droplinks and brake discs kaput - All Fixed.
* Rear wheel bearing rumble - TBC
* Engine wiring fried and Immobilser / Eco mode fault......ongoing.
Problems to date:
* Roof not working, Gearbox bearing knackered, Wishbones, droplinks and brake discs kaput - All Fixed.
* Rear wheel bearing rumble - TBC
* Engine wiring fried and Immobilser / Eco mode fault......ongoing.